Что за девайс? А также про метры, радиусы, рокеры и тд

[pokkis]

Do you leave some in your quiver?

That 202 baby on right side picture is on my quiver still

Here my quiver few years ago, that long Tinkler is only one still there
http://www.ojankaivajat.org/gallery/alb ... quiver.jpg

[Старикашка]

по-русски это звучит так:
"а оно надо"?!

Я немного поменял свое отношение к выдумкам изобретателей. Пусть себе стараются для тех, кому хочется бездельничать на доске. Таких ведь большинство. Глядишь, с этими штуками и слалом станет зрелищным видом спорта.

Я думаю, что скорее надо чем не надо. Хотя бы для того, чтобы в дизайне сноуборда появились какие либо подвижки.

pokkis :-) why don`t you have any Swoard there?

[pokkis]

I had Swoard years ago, but it is already gone

[Старикашка]

I had Swoard years ago, but it is already gone

:-) Why?

Would you try new board?

[pokkis]

No, i prefer multi radius side cuts.

[au]

No, i prefer multi radius side cuts.

and titanal for sure

[pokkis]

All my Tinklers were multi radius and not titanal but that plate there makes lots of goodies combined to adjustable stix.
But yes, now i'm metal man

[Старикашка]

No, i prefer multi radius side cuts.

I have to take some Virus boards for test to understand multi-radius advantage. I had one, similar size to my Swoard, but not get this understanding.

[pokkis]

I have some boards with two radius NSR and some as three radius NSR+
and i must say they work quite different way.
For racing i like three radius NSR+ but for free carving i like two radius NSR.
My new board for this season will be two radius NSR to practice EC turns.

[shrt]

Pokkis, could u describe me, how does multi radius work? And what's the difference between feelings when u're riding boards with 2 and 3 radiuses?

[ Post made via iPhone ]

[pokkis]

Those Tinklers typically had not big difference on radius, less than i nowadays use.
That 175 had 11m on nose and 13 on tail. My new wide Coiler will have 13m on nose and 17m on tail.
My last year wide Coiler had nose 13m, center 21m and tail 17m.

For free carving i prefer 2 radius, due i'm simple person
Tighter nose makes board turn tight, note that metal boards are quite soft so it turns tighter than numbers look.
More open tail combined to tapper makes end of turn more open preventing turn turn up hill and killing your speed too much.
This is very useful when slope is not very steep cause it allows you keep good speed more easily. But if you like to kill speed just push little bit more at end of turn and it starts to go uphill and kills speed.

3 radius board usually has larger cut at center at that makes it real speed demon cause when you keep your balance in middle then it turns on that wide mid range.
That is nice feature for race board but i did not liked it for free carve cause some times i had problems on getting too much speed on not-steep slopes. On steep slopes you can just take deep carve to kill speed but on flat it is not always option. This is why i switched back to 13/17 what i had on previous season too

[au]

Those Tinklers typically had not big difference on radius, less than i nowadays use.
That 175 had 11m on nose and 13 on tail. My new wide Coiler will have 13m on nose and 17m on tail.
My last year wide Coiler had nose 13m, center 21m and tail 17m.

21m
Pokkis, you definately like super-G racing

[easyArider]

21m ... super-G racing

нууу...
например - http://mustag.ru/forum/viewtopic.php?p=686168#p686168

[au]

нууу...
например - http://mustag.ru/forum/viewtopic.php?p=686168#p686168

например что?

клотоида, тьфу ты, спираль по-русски (L~1/R) - это обычный эллиптический вырез
но пафосная подача радует

[easyArider]

например, связь радиуса, траектории доски и вида соревнований ;)

[au]

связь прямая

[easyArider]

то есть

wide Coiler had nose 13m, center 21m and tail 17m

едет исключительно по своему радиусу, причем 21 метровому?

[shrt]

Pokkis, thanks for ur answer!

[ Post made via iPhone ]